|
Kirloskar Solid Handling Non Clog Pumps Features
- Solid size up to 105 mm
- Back pull-out design
- Gland packed / Mechanical Seal
- 50 Hz / 60 Hz availability
- Also available in vertical execution
Applications
- Sludge
- Sewage
- Power material slurries
- Sugar factory waste
Range
- Delivery size up to 200 mm
- Capacity up to 800 m3/hr
- Head up to 90 metres
- Temperature (-) 10 degree C to 140 degree C
Constructional Features
SHM are horizontal non clog pumps having single stage, single suction with back pull out type design. SHS are vertical nonclog pumps for wet pit applications. The pump unit is suspended by a column pipe which also protects the transmission shaft. These pumps can be offered with a column length up to 6.5 m.
SHV are vertical non clog pumps for dry pit application in vertical orientation to be driven by vertical flange mounted motor which is directly coupled.
Also, SHVT pumps are vertical non clog pumps for dry pit application in vertical orientation to be driven by vertical flange mounted motor but coupled through transmission shafting. These pumps operate at 50 Hz and 60 Hz.
Shaft
In SHM pumps, four driving units cover the entire range. Shaft is supported by two bearings. Shaft in stuffing box area is protected by a shaft sleeve. Axial clearance between semi-open impeller and suction wear plate can be adjusted externally without dismantling the pump. The shaft sleeves under bearing housing and bearing spider are shrunk fitted to shaft in SHS pumps.
Direction of Rotation
Clockwise viewed from driving end.
Drive
These pumps are suitable for coupling with electric motor or engine directly or through belt drives.
Flanges
Standard drilling to DIN 2533 ND 16
|
